不銹鋼扁鐵

回首頁 > 產品資訊 > 不銹鋼扁鐵

不銹鋼扁鐵的使用範圍廣泛,用於工業工具、機械零件及建築上用於結構與扶梯等等,其製成有分為冷軋裁切而成,熱軋抽至而成,因應需求可以將成型之不銹鋼扁鐵導角或拋砂為HL,增加其使用的廣泛度,建錩集團目前可以提供冷軋100%台灣製造外,也可提供冷、熱軋中國製造之材料,方便客戶採購,熱軋與冷軋的最大差異在於切面。
Stainless Steel Flat Bar Stainless Steel Flat Bar
Stainless Steel Flat Bar Stainless Steel Flat Bar
Stainless Steel Flat Bar Stainless Steel Flat Bar
厚度 寬度(常用規格)
3.0~12.0 16mm 20mm 25mm 30~32mm 38~40mm 50~150mm
Surface Finish Definition Application
No.1 The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. Building construction
STAINLESS STEEL HRAP FLAT BAR
SEPCIFICATIONS ALLOWABLE DEVIATION
25 X 3~15MM
(1" X 1/8"~3/5")
1.WIDTH≦50mm,THICKNESS≦20mm,
THICKNESS DEVITION ±0.4mm.
30 X 3~16MM
(1-1/5" X 1/8"~16/25")
35 X 3~16MM
(1-2/5" X 1/8"~16/25")
40 X 3~16MM
(1-3/5"X1/8"~16/25")
45 X 4~16MM
(1-4/5" X 4/25"~16/25")
50 X 4~16MM
(2" X 4/25"~16/25")
60 X 4~16MM
(2-2/5" X4/25"~16/25")
 
65 X 4~16MM
(2-3/5" X 4/25"~16/25")
70 X 5~16MM
(2-4/5" X 4/25"~16/25")
1).WIDHT≦50mm,THICKNESS DEVIATION ± 0.8mm
75 X 5~16MM
(3" X 1/5"~16/25")
80 X 5~16MM
(3-1/5" x 1/5"~16/25")
2).50mm<WIDTH≦75mm,WIDTH DEVIATION ± 1.2mm
90 X 5~16MM
(3-1/2" X1/5"~16/25")
100 X 5~18MM
(4" X 1/5"~7/10")
3).75mm<WIDTH≦150mm,WIDTH DEVIATION ±1.5mm.
120 X 8/20MM
(4-7/10"~3/10"&4/5")
(130~300) X (10~20)MM
(5"~12") x(2/5"~4/5")